Product Description
2010-2013 Kia Forte Cargo Tray
This 2010-2013 Kia Forte Cargo Tray was developed for the Sedan model! The Koup and 5-Door have their own separate trays. This skid-resistant rubber tray is 100% guaranteed to fit your vehicle. The Kia Forte Cargo Tray was developed with the mindset of keeping your car in perfect condition. So if you lug a lot of items around in your trunk, we highly recommend this product. You already invested in the car, and there are a great number of reasons to save your car's interior trunk space with the Kia Forte Cargo Tray. It is the perfect accessory at protecting your interior carpeting from dirt, spills, oil or any other damaging conditions! Additionally, the Kia Forte Cargo Tray has raised outer edges that help to contain any spill within the tray itself instead of it leaking onto your carpet.
The Kia Forte Cargo Tray (B008) will fit the 2010, 2011, 2012, and 2013 model years
Fitment Notes: Will NOT fit 2010 LX trim-level with non-folding seats
Manufacturer Part Number: U8120 1M000
Steps for unrolling/unfolding your cargo tray:
- Select a Suitable Surface:
- Bring the cargo tray to a hard, flat surface that is large enough to accommodate the fully unfolded liner.
- Initial Placement:
- Lay the cargo tray face up on the surface.
- Weighted Corners:
- Allow the cargo tray to remain face up for about an hour, and use weights on the corners to help flatten it.
- Flip and Repeat (if necessary):
- If needed, flip the cargo tray over and repeat the previous steps to ensure both sides are adequately flattened.
- Consider Weather Conditions:
- Be aware that the process may take longer if the cargo tray was shipped or stored in colder weather.
- Use of Heat (if necessary):
- In case of particularly stubborn creases, a heat gun or hair dryer can be used carefully to warm up those areas and aid in the unfolding process.
- Exercise Caution with Heat Tools:
- When using a heat gun or hair dryer, exercise caution to avoid damage. Apply heat gradually and maintain a safe distance to prevent overheating or melting.